DIY: Bottomless Pit

If we had known we would be Halloween blogging, we would have taken better pictures and more notes while we were building our props.  So, if you have questions, please let us know!  :)

INSTRUCTIONS:

Depending on the desired dimensions of your pit, you'll need up to four sheets of plywood and at least two 8' runs of 2x4's.  We cut the plywood to the desired size, making sure that the bottom length was the same as the inset length of the notch in our 2x4's.  The idea is to create a friction fit so that the plywood slides into the notched rail in the 2x4 for easy disassembly and storage during the off season (if you have one at your house).  

The "stone" is created using sheets of foam.  We created the grout lines using a soldering iron - just heat it up and melt away.  Again, do this OUTSIDE because even Haunters shouldn't breathe too much melting plastic.  Glue your stone walls to the plywood.  

Don't forget to cut a hole for your lightbulb and its housing in the plywood and foam.  This will be attached at the end.

As for your top and bottom pieces - you want to create a notch that runs the length of the plywood sheets that is wide enough to shove (and I mean SHOVE) the plywood into.  The inside of the 2x4 is also routered out to create a place for the mirror or Plexiglas to sit.  

We like to use Plexiglas rather than a mirror so there is no danger of it breaking if some errant Halloweener decides to get a really close look at the bottom of your bottomless pit.  For the top piece, you do have to epoxy the mirror to the 2x4 frame which has the same notches as the bottom piece.  We tried to have it sit in a frame somehow, but the lip always showed when the Pit was lit up and ruined the whole effect.

Plexiglas is readily available and to make it "one-way" glass you'll need to go down to Osh or some other home retailer store.  We found our one-way material in the window coverings section - it is really considered privacy material used on storefront windows.  (Took us a while to figure that out in the store!)  We didn't bother purchasing the specialty fluid to make application easier - we just used windex and it worked just fine.  Application of the privacy screen to the Plexiglas is a two man job, so have help on hand.  

 Assemble the bottom piece with its one-way mirror sitting in its slot, shove the four sides into their respective notches and jam the top piece on to create a friction fit bottomless pit.  Ours has survived the heat of the attic just fine - the glue gave way between the foam and plywood, but that it an easy fix every year.  The mirror bubbled a little bit, but it is hardly noticeable once it is switched on. 

We hope you like our project!  The kids get a big kick out of it at our house.  

Happy Haunting!

WIN THIS TOMBSTONE!

Go to our Facebook page - Like and Share our Diliges post by September 1st and be entered to win our Diliges (Latin for Love) Tombstone!  

We'll announce the winner on Facebook and September 2nd!  Good Luck!

When Did Your Halloween Obsession Start?

Clearly, mine started much earlier than I even knew.  

My Mom dug this gem out of my grandmother's possessions while cleaning out her house.  

That's me, right there! 

Calisse, the second place winner in the 7 to 9 year old category at the Buellton store.  I remember winning this and being surprised.  I don't remember where I put that watch, though! Too bad, I sure would like to have it now.  :)

Tell us, when did you know you had a Halloween problem?  

DIY: Witch

One of our static props is our witch in her lair.  She has all manner of thing surrounding her from specimen jars, books on anatomy, mortar and pistol , crows, candelabras with skulls and lots of candles!  This year, we're going to add an autonomous rocking cradle - no baby, but lots of lace (hee, hee).  When we built her, we never thought we'd be blogging about our projects so we don't have many in-progress pics!  But, if anyone has questions about how we made her, let us know and we're happy to answer them all. 

Stage one - buy another skeleton, 3/4 size again to save weight.  These come with a hook in their skull which makes for easy hanging.  Our witch is suspended using wire that threads through her hair and hat.

Stage two - insert eyes.  We used white marbles (the big ones) with colored flecks in them.  The white glowed beautifully when only slightly illuminated by a black light.  

Stage three - paper mache!  The first layers built the shape and gave foundation.  The top layer was a mushy mess, but gave great texture. 

Stage four - paint!  We used an airbrush and concocted this putrid green.  The airbrush allowed us to paint her without compromising the delicate nature of the paper mache.  

Stage five - dress and display!  We found this nasty old wig at a thrift store for $1.  Her clothes and hat were purchased specifically for her.  We wanted the hat to be positionable and it took awhile to find that hat!  Her shirt and skirt are classic witch attire from any costume retailer.

DIY: BBQ Bob

This glorious piece of terror came from the wellspring of my mind in conjunction with the internet musings of some other Halloween lovers.  He is lovingly called BBQ Bob and as our daughter tells us over and again, "that's disgusting!"  Well, thank you my dear.  Mission accomplished.  Now the how to:

BOB
1.  Start with a pre-fabricated skeleton.  We bought from www.skeleton-factory.com which buys 4th quality anatomical scale models and sells them to Halloween nuts.  We used a 3/4 size to save on weight as these guys are HEAVY.  

2.  You should be familiar with foam-o-fill, aka Great Stuff or expanding spray foam.  We used this to replicate the general appearance of intestines and guts.  Works wonderfully.  

Apply the foam to Bob while he is lying face up on a protected surface. The foam sticks to everything, including your skin, permanently.  

3.  We used red paint as a base coat and then dry brushed black over it give Bob that raw meat on the inside, toasted on the outside look.

4.  You'll need some plastic sheeting (available at any home improvement store) and make sure you do this OUTSIDE because it is toxic.  This is wrapped around Bob and melted with a heat gun to give the appearance of burnt skin.  You can even twist and layer so it looks like tendons and muscle.  

5.  The final stage involves using a really dark stain like walnut and staining the plastic.  It will dry, just give it time.  Dry brushing with black paint also works well.  

6.  We attached Bob to a spit and with a rotisserie motor got him to rotate.  His hands flop back and forth as he rotates!  Awesome!

7.  Finally, we put a light box under Bob so it looks like smoldering fire under him in the dark. Instructions on how to make a fire box in a later blog post.  

We hope you like him!  If you have any questions, just let us know.

Happy Haunting!

The Website is Live!

Go to www.tombstonefactory.com to see our products and place your orders for Halloween!

Don't forget to Like our Facebook page - the first 500 Likes will receive a 10% discount on their future order.  Like away!

                      

Sneek Peek on Facebook!

Check out our Facebook page, www.facebook.com/TombstoneFactory for a sneek peek of our product line!  

When we reach 500 Likes, we'll give everyone that Likes us a special discount.  Like away!